Voice Link 1~8 E1 ( with IVR II 4.0.0)

• PCI high-density E1 card, with up to 8 E1 on single card and 8 cards per system. Suitable for carrier class Applications. (CompactPCI models available, contact CallURL Inc. for details)
• TAPI driver to extand existing TAPI based application, running smoothly for large number of channels
• Compatible in Contax IVR II 3.0.0, all call flow can be seamlessly migrated to large system applications
• Configure multiple boards in a single PC for easy and cost-effective system expansion, capable of scaling from 30 to 1920 ports. (Use very LOW PC CPU power, due to task offloaded to multiple DSP’s)
• Up to 2.9 GIPS digital signal processing power support, Caller ID detection,FAX, FSK SM, Conference etc.
• Full duplex voice channels for VoIP gateway applications
• Bundled with TAPI and wave drivers for Windows 2000, 2003 and Windows XP
• Shipped with EasyTAPI 3.0.0 CD for simple driver installation and verification
• Conference and channel switch features can be realized with Extension of Contax IVR II 3.0.0
• Flexible parameter tuning for Media (Voice, DTMF, CPSignal, FAX, Half-duplex FSK message) via setting tool

• Interactive Voice Response (IVR)
• Automatic Call Distribution (ACD)
• Unified Messaging System (UMS)
• Unified Communication (UC) and Teleconferencing
• TAPI-compliant AA, VM and Recording applications (Many available, consult your dealers for details)
• Voice and Fax applications Development

• Configuration
  VoiceLink E1 card provides E1 telephone interface for direct connection to matching systems. Protocal support includes E1 / PRI, SS1 & SS7. Up to 8 VoiceLink cards can be installed in PCI slots of a single PC chassis enabling port expansion up to 1920 ports per system.
• Network Interface
  VoiceLink supports CEPT E1 interface, based on user's configuration, it will perform as parameters programmed. Standard H.100 style connector iprovides telephony bus connections. Software selectable local digital loopback plus remote testing utility allows fast troubleshooting and issue isolation.
• Open Architecture
  The VoiceLink E1 cards share a common driver architecture with other CallURL Talk Voice boards, this offered users and developers with the maximum in flexibility and scalability. All VoiceLink / Talk Voice products support standard TAPI and wave drivers for Windows 2000, 2003 and Windows XP (Home or Pro. editions).

• General
  Number of ports: 30 (each E1)
  Number of E1s: up to 8 per board
  Max. boards per system: 8
  Digital signal processor: TI TMS 320 54 & 62 series cps
• Host Interface
  Electrical: Rev. 2.2 of PCI bus specification
  Bus speed: 33 MHz maximum
  Shared memory: 512 KB dual port static memory
  Address and interrupts configured automatically by PnP BIOS or PnP OS
  Board ID: DIP switch to uniquely identify each board
• Telephone Interface
  Line interface: CEPT E1 (BNC for 75 Ohm lines)
  Connectors: Adaptor to RJ-48C for 120 Ohm lines
  Support SS1, SS7 & DSS1 on per E1 basis. (Mix of different protocol for different E1 is allowed)
  Support Caller ID, FLASH, ROUTER, Conference and FAX, FSK Messaging etc.
• Audio Signal and Interface
  Maximum parties per conference: 128 (2 to 127 groups)
  Automatic gain control (AGC) or programmable
  Maximum 3 X 128 conferences per system
  For high quality conference, conference resource needs to be estimated before constructing system.
• Audio Encoding
  Sample rate: 8KHz
  32 Kbps OKI ADPCM
  64 Kbps µ-law PCM
  64 Kbps A-law PCM
  64 Kbps windows 8 / 16-bit PCM
• DTMF Tone Detection
  DTMF digits: 0 to 9, *, #, A,B, C & D
  Dynamic range: -60 dBm to 0 dBm per tone (default -3)
  Tone duration: 80 ms (1 - 65535 range)
  DTMF Break: 50 ms (1 - 65635 range)
• Tone Dialing
  Transmit level: normal at -6.0dBm (high), -8.0dBm (low), parameters programmable
  Frequency variation: < 1%
• Bundled Drivers and Software
  Bundled with TAPI and wave drivers for Windows 2000, 2003 and Windows XP
• Software Compatibility
  Microsoft TAPI and wave driver compliant applications
• Power Requirements
  +5.0V @ 1.0 A
  +12V  @ 200 mA
  - 12V  @ 200 mA
• Size
  315mm (L) x 118mm (H); 12.40” (L) x 4.64” (H)
• Certification
  Telephone network: FCC Part 68
  EMI: FCC Part 15, Class B
  BSMI / TAIWAN
• Environment
  Operating temperature: 0 to 50 C (32 to 122 F)
  Storage temperature: -20 to 65 C (4 to 149 F)
  Humidity: 10 to 80%, non-condensing